霍尼韋爾7系PID傳感器智能模塊丨產品展示

霍尼韋爾7系PID傳感器智能模塊

霍尼韋爾7系PID傳感器智能模塊

http://www.fusens.com/cn/product/othersensor/pid/7R_PID.html

7R+ PID sensor is a self contained intelligent sensor module with built-in sensor processor, lamp driver, analog and digital interface circuits. It is designed to detect volatile organic compound (VOC) with a standard external interface. It allows the sensor module to be easily integrated into a wired or wireless communication system for remote, wide area and pervasive monitoring applications. The sensor module can be powered by typical 5VDC. It is housed in a stainless steel enclosure with a standard 8 pins interface connector.

Key Features

Auto identification
High resolution: 0.1 ppm
Quick response time
Analog & Digital signal output
Wide measurement range
Digital output (RS-232 signal Tx, Rx at TTL level)
Suitable for both mobile and fixed monitoring applications
Low maintenance and service support cost
Easily integrated into existing monitoring system
Highly resistant to RFI/EMI interference
IECEx/UL/ATEX certification (Pending)
Less than 500 mW power consumption

Applications

Public transportation facility, airport, train station, subway tunnels, etc
Hazardous material transportation
Refinery and Oil & gas exploration
Power plants, chemical plants, storage tanks, etc
Chemical lab and Archaeological Museum
Military installations
Industrial safety
Emergency response & Industrial safety application
Refinery and Oil & gas exploration

Package	Stainless steel Housing
Size	Ø 40.5mm * 26.5mm
Weight	Typical 90g

Specifications

Hazard Area Approval	IECEx/UL/ATEX: IS design
Power Supply	4.7V-5.5V DC
Current	150 mA max
Resolution	100 ppb
Response Time	T90<15s
Measurement Range	0-200 ppm IBE
Accuracy	±20% at normal conditions (20℃, 50RH%)
Analog signal output	0---2.5V DC output
Signal Drift	Typical ≤±15% FSS/month;
Digital Interface	Serial Interface (UART) Transmit (Tx) 3.3V TTL Receive (Rx) 3.3V TTL
Life Time	2 years (except lamp and detector)
Operating Temperature	-20C to 50 C
Operating Humidity	0 to 95%RH non-condensing
EMI/RFI	Highly resistant to EMI/RFI Compliant with EMC Directive 89/336/EEC

Detector Specifications

Interface Pin Function:

Pin	Name	Function
1	Vcc	Power supply, 4.7V‐5.5VDC
2	CS	Reserved for chip selection for communication
3	Analog	Analog signal output: 0—2.5V DC
4	RxD	Receive data, 3.3V TTL
5	OpenDrain	Reserved for switch signal output
6	Gnd	Ground
7	Sdep	Sensor module dependent, 0‐0.6V means turn off the power, 2.2‐ 3.3V means turn on.
8	TxD	Transmit data, 3.3V TTL

熱銷產品

推薦產品

特價產品

分類推薦